Installing Support Brackets

To provide adequate shelf support, support brackets (or you may use support poles instead) are needed every three feet or less. Closer spacing provides additional support, but should not interfere with your storage requirements. Support brackets are also required for open-end installations (those not ending at a wall). To install, position bracket on shelf so that it hooks over the top wire rod on the front lip and a deck wire runs between the hooks. Level your shelf, drill a 1/4" hole using the bracket as a guide, and install a wall anchor by pushing it into the drilled hole and securing with a pin or screw as required for your wall type. When used with shelves not ending at walls, you will need to position support brackets 2" in from the open ends as well as every three feet.